MSI Immerse GV60 Streaming Mic: Great value or another Yeti clone?

Attack of the clones?

MSI recently introduced a microphone aimed at streamers; the MSI Immerse GV60. At first I was not immediately enthusiastic when I saw the microphone, as it strongly reminded me of the Blue Yeti. But is it just a clone or does MSI know how to add value in this category?


The if we look at the box of the MSI Immerse GV60, it looks quite sober. The box only consists of white, black and grey colors. In my opinion, this is not a wrong choice. MSI clearly shows that it does not only puts focus on a young gaming audience with this product. On the frontside is a large image of the microphone with the model number listed. You will also find an MSI logo on this side. The main specifications are listed on the side. It is striking that both the sample rate and the bit rate are higher than with the major competitor; the Blue Yeti. Instead this is more in line with the more expensive Blue Yeti X.

Inside the box

After the outer box has been pulled off, the inner box can be opened. First you see the manual, which is thicker than your wife’s average romantic pocketbook. The microphone can be found in a thick foam bunker, wrapped in a plastic jacket. The foot is already in place. On the side is a flap containing the USB-C to USB-A cable, an included pop filter and two caps to cover up the screw holes, more about this later.

The Immerse GV60 unpacked

The microphone gives a good first impression. It is sturdy, quite heavy even compared to an already hefty Blue Yeti. The design is slightly less rounded, but still very sleek. The MSI Immerse GV60 has a sleek, uniform dark gray finish in matte aluminum. On the front there are 3 buttons of equal size for the various recording modes, headset volume and microphone volume. Below that is a small button that mutes the microphone. The microphone comes on a stand that feels sturdy. The Immerse GV60 can be screwed in on both sides and does not fall down when positioned, for example, at an angle. At the bottom you will find a USB-C connection, a screw connection for a boom arm and a 3.5 inch microphone connection.


Noticeable specifications include an USB C port and a higher then average sample- and bit rate.

In practice

I bought the microphone mainly because of its clean look and lack of software. I have experience with a Blue Yeti Nano and a HyperX Quadcast microphone. These are my personal frames of reference.

Appearance of the Immerse GV60

The microphone has a matte finish and no eye-catching logos. MSI has subtly put its name on the front in a dark color. On the back if the mic you will find an MSI brand logo. A small light indicates the status of the microphone; green for active, red for mute. As mentioned, the buttons have a uniform look with a white text and logo to indicate the function. In my opinion, the buttons could have had some ridges for just that little bit of extra grip. The MSI Immerse GV60 looks sleek and will not distract during a teams meeting. Speaking of which, check out this article about monitor arms for a cleaner desk.

Ease of use

The microphone can be used immediately, no separate software is required. My windows 11 system recognized the microphone immediately after connecting it. In windows itself you can indicate if the MSI should or should not do all the recording work instead of any other microphone present, such as that of a webcam. MSI has not developed any software for the microphone. If you want to use certain filters or adjust other sound effects, you will have to do this with your streaming software. The advantage is that no unnecessary resources are used by software that not everybody will be using. The stand is easy to remove if you want to place the microphone on a boom arm. the screw holes are then neatly covered with the supplied caps.

Recording quality of the Immerse GV60

I have used the Immerse GV60 from MSI for online gaming, a video call through teams and for communication during a phone call. In all cases, according to the person on the other end, I was very easy to understand. Voices came across true-to-live, with no noise or distortion. I have largely made use of the cardioid setting. If you want to make a podcast interview, the stereo mode is ideal. For people who like to play with ASMR, there is the stereo mode. I notice I find it very convenient to be able to adjust these settings without having to reach to the back of the mic. This was one issue I had with the Yeti Nano I used before.


MSI has released a very nice microphone with the Immerse GV60. The appearance is initially reminiscent of the Blue Yeti. However, to put the MSI away as a simple clone would do the product injustice. For about the same price as the Blue Yeti you get a higher sample and bit rate with the MSI. If you want the same level of recording quality with a Blue Yeti you will need to step up to the Blue Yeti X. I haven’t used that before, but it seems to be a nice mic as well. The appearance is not disturbing when it comes into the picture and the operation is simple. A pop filter is included, although any threaded adapter will have to be purchased separately. All in all, a very solid entry from MSI. For the price I paid, which was around €110,- I can highly recommend this microphone. For more info visit the official product page.