The Akko CS Silver switches came with my Akko 3098B keyboard. You can find the review of the board here.
I have used Cherry Brown and Gateron brown switches myself in the past, with the latter typing just a bit better. Then moved on to Gateron Yellows. When choosing the keyboard, as mentioned earlier in the review of the keyboard, I opted for the CS silver switches. I had the choice of CS Silver, the Pink and two other switches. The main reason for me to choose the CS silver was the fact that I wanted to try a so-called “fast” switch.
About the Akko CS Silver Switches
The CS silver switches belong to the Custom Switches from Akko. The Custom switches are manufactured as a result of feedback and market research by Akko. Often a switch is taken from the existing line-up and then improved upon. The CS Silver switches have a very short pre-travel of only 1mm and is made of high quality materials.
The stem is made of POM, also called Polyacetal. This material is very sturdy and dimensionally stable and is widely used in mechanical engineering. The top is made of poly-carbonate and the bottom of nylon.
Using the Akko CS Silver switches
The Silver switches are pleasant to use. In my opinion, they don’t need a lube to remove ping or scratch. But it never hurts. Personally, I noticed that the switches are very sensitive. For me personally, this is not great. I make a lot of typos because of this.
For playing games where speed is a factor, these will be very pleasant. There is no wobble in the switches, this is partly thanks to the dust cover where there is a wall surrounding the stem.
Akko’s switches have a so-called 3-pin system and can therefore be used for almost all hot-swap boards. The CS switches also have a higher stem, so that keycaps with the Cherry profile should not cause any problems.
The top of the switch is transparent. This allows it to easily let light through. Because the bottom is made of Nylon, it does not allow light to pass through. The difference with the Jelly series is therefore a slightly lower yield of RGB light, although this is still more than enough for most people. If you do like RGB you should check out this ACR set!
The CS silver switches are perfect for the gamers who want to transfer their actions from fingers to game as quickly as possible. The switch activates itself at the lightest touch. There is hardly a pre-travel. As mentioned earlier, lubing is not a must with this switch. Due to the material used and the quality of production, it is already very smooth. This is my personal opinion, of course.
For people who mainly type, another switch from the Akko range will probably be better suited. Linear alternatives are, for example, the V3 Cream Yellow or the hand-lubed CS Piano. For lovers of Tactile, these are for example the Gateron Orange or Akko POM Brown.